 |
VMS Drag Car Contest
Register to win the world's fastest Volvo!
For only $100.00 you can register to win this beautiful one of a kind NHRA Certified to 7.50 secs. 1975 Volvo 242 Drag car.
Half of the proceeds will go to Help a child foundation.
There will be only 300 entries sold before we pull the winner.
If the winner chooses not to take the car then they can choose to take a $15,000.00 cash payment instead.
Volvo Drag car specs.
This is a full 12 point chassis built from mild steel and is fully NHRA...
$100.00 |
| More info... |
|
|
 |
 |
New T3/T4 Turbo Kits
Would you like 400-500 H.P. for a reasonable price? If so then this is the Turbo Kit for you.
Specially designed for all of the 5 cylinder Volvo front wheel drive cars from 1993 to 2007 Except the S/V 40 series
Brand new starter turbo kit includes Turbonetics turbo and wastegate, and Volvo Motorsports turbo manifold. Look no further, this kit is the best bang for the buck on the market today. We only uses top quality components in our turbo kits: Turbonetics Turbochargers combined...
$2,195.00 |
| More info... |
|
|
|
 |
Top pipe w/bov
This is the top replacement pipe for 1993-1997 Volvo 850 Turbos and all 70 series from 1998-2003
$249.00 |
| More info... |
|
|
|
 |
VMS RIP W/HKS BOV
VMS R.I.P Kit W HKS/BOV
VMS Has developed a new reverse intercooler kit that comes with a HKS style blow off valve installed. We at VMS believe that this is the way to go for ultimate performance.
$569.00 |
| More info... |
|
|
|
 |
New R.I.P. Kit W/BOV
VMS R.I.P Kit W/BOV
VMS Has developed a new reverse intercooler kit that comes with a greddy style blow off valve installed. We at VMS believe that this is the way to go for ultimate performance. Made from .065 wall aluminum it will maintain a much lower air charge temperture that will increase horse power output.
$529.00 |
| More info... |
|
|
|
 |
Volvo Replacement H-Beam Connecting rods
VMS Hi-Performance H-Beam Connecting rods (NOW IN STOCK)
These Connecting rods are a direct replacement for all 850's S/V 40's
960's C/S/V/ 70 series.
All aluminum Block engines from 1993 to 2003 models
VMS Hi Performance custom connecting rods are made from Certified SAE 4340 steel, vacuum to remove impurities. All surfaces are 100% machined. Shot peened to stress relieve the metal.Multi Stage Heat Treated.Packaged in weight matched sets end to end +/- 1 gram. They come with...
$130.00 |
| More info... |
|
|
|
 |
VMS Fuel pressure regulator
HIGH QUALITY CNC MACHNINED 6061 T-6 BILLET ALUMINUM
FULLY ADJUSTABLE UP TO 85 PSI
NECESSARY HARDWARE(FUEL LINE, VAC. HOSE, MOUNTING BRACKET, CLAMPS ETC.) INCLUDED
FUEL PRESSURE GAUGE INCLUDED
$119.00 |
| More info... |
|
|
|
 |
Greddy Type BOV
Super reliable blow-off valve made by VMS. Great for cars running in blow-off or re-route mode.
$169.00 $149.00 |
| More info... |
|
|
|
 |
HKS Type BOV
Universal billet aluminum blow-off valve made by VMS. The BOV utilizes a dual valve system to ensure quick response and complete closure during idle. *Aluminum and steel flanges sold separately.
$179.00 $119.00 |
| More info... |
|
|
|
 |
GT3076R/WG
GT3076R-WG-TURBO
Price:$1,250.00
The "GT3076R-WG" packs the 500HP capable, quick spooling 52 trim 76mm compressor found in the popular GT3037 with the high flowing 90 trim turbine wheel found in the bigger GT3071R-WG, making it the highest flowing turbo available in the internal wastegated configuration. Ideal higher power upgrade for GT28RS/GT2871R/GT3071R-WG setups looking for a lot more power. Comes with T25 style inlet flange.
Turbine
-Wheel: 56.5mm w/ 90 trim
-Housing: .64 or...
$1,250.00 |
| More info... |
|
|
|
 |
Garrett GT3076R-WG Turbo Kits form VMS
VMS has just released there new Garrett GT3076R-WG Turbo kit. This kit comes with everything you for a easy complete installation and ia available for all of the 4 cylinder and 5 cylinder applications.
The "GT3076R-WG" packs the 500HP capable, quick spooling 52 trim 76mm compressor found in the popular GT3037 with the high flowing 90 trim turbine wheel found in the bigger GT3071R-WG, making it the highest flowing turbo available in the internal wastegated configuration. Ideal higher power upgrade...
$3,295.00 |
| More info... |
|
|
|
 |
Gt 2871R Turbo Kit
The new VMS Turbo upgrade come with every thing that you need for a easy installation of our new turbo kits. The Garrett GT 2871R turbo is capable of 400 Plus hp
$2,995.00 |
| More info... |
|
|
|
 |
Factory Replacement Engines
3 Year unlimited mileage warrenty
Volvo Engines By VMS Are you looking for a low cost rebuilt Volvo engine with maximum performance, with maximum power, with shipping to your door and with minimum problems? If these are your requirements, look no further than VMS! The professionals at VMS know Volvo motors! They are the recognized experts in the industry when it comes to all Volvo product engines - from the economical 240 4-cylinder to the powerful S Series sedans, the family...
$3,995.00 |
| More info... |
|
|
|
 |
VMS/RIP 1002
New RIP From VMS Our new R.I.P. Kit is made from .065 aluminum and is very easy to install and should give some amazing gains in horse power.
When we tested them at 95 degress it dropped the air itake temperture 25 degrees.
$399.00 |
| More info... |
|
|
|
 |
New VMS Drop Links for S/V 40 Series
New from VMS
Hi-Performance adjustable drop links.
These drop links are made form aircraft high quality chomoly steel. The rod ends have a self lubricating polimer insert that will give you very smoothe operation under any condition and will allow you to add preload to either wheel for track tuning conditions And come with a limited lifetime warranty.
If you ever wear them out VMS will replace the rod ends for the life of your car
$199.00 |
| More info... |
|
|
|
 |
New VMS Drop links for you 850/70 series Volvo
New from VMS
Hi-Performance adjustable drop links.
These drop links are made form aircraft high quality chomoly steel. The rod ends have a self lubricating polimer insert that will give you very smoothe operation under any condition and will allow you to add preload to either wheel for track tuning conditions And come with a limited lifetime warranty.
If you ever wear them out VMS will replace the rod ends for the life of your car
$199.00 $169.00 |
| More info... |
|
|
|
|
|
|
 |
New VMS Engine Stabilizer Mount
Engine Stabilizer Mount The original rubber engine stabilizer mount has proven to be a weak link that that can fail prematurely and allow the engine to rock and move during acceleration and braking, significantly affecting the handling and performance of the car. This mount is located near the top of the engine on the back side just to the right of center, connecting the engine to the firewall. The original mount requires a special Volvo press tool for removal and installation. Our improved polyurethane...
$34.95 |
| More info... |
|
|
|
 |
VMS Performance Cat
Product ID:?VMS-415250??? Category:?HI PERFORMANCE UNIVERSAL METALLIC SUBSTRATE CATALYTIC CONVERTERDescription:?2 1/2" X 2 1/2" 2 & 3 WAY HI PERFORMANCE UNIVERSAL METALLIC SUBSTRATE CATALYTIC CONVERTER 4" ROUND 11" LONG
$129.00 |
| More info... |
|
|
|
 |
VMS Performance Cat
Product ID: VMS-415250 Category: HI PERFORMANCE UNIVERSAL METALLIC SUBSTRATE CATALYTIC CONVERTERDescription: 2 1/2" X 2 1/2" 2 & 3 WAY - HI PERFORMANCE UNIVERSAL METALLIC SUBSTRATE CATALYTIC CONVERTER 4" ROUND 11" LONG
$129.00 |
| More info... |
|
|
|
 |
Remanufactured Cylinder Heads
These are VMS Cylinder heads that are Remanufactured in the same way as the cylinder heads that go on all of our race motors. They are full presure tested resurefaced,Full port and polish. They all come with cryo treated valve springs and a five angle valve job. There is a $700.00 core charge that you will get back as soon as we recieve your cylinder head back.
$1,395.00 $1,195.00 |
| More info... |
|
|
|
 |
Engine Stabilizer Mount
Engine Stabilizer Mount The original rubber engine stabilizer mount has proven to be a weak link that that can fail prematurely and allow the engine to rock and move during acceleration and braking, significantly affecting the handling and performance of the car. This mount is located near the top of the engine on the back side just to the right of center, connecting the engine to the firewall. The original mount requires a special Volvo press tool for removal and installation. Our improved polyurethane...
$26.95 |
| More info... |
|
|
|
|
|
|
 |
ARP Head Stud Kits
It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there's not a better stud setup on the market today.For openers, ARP uses a premium grade 8740 alloy that is rated far superior to aircraft quality. Then, each stud is placed vertically in special racks and precisely heat-treated to 190,000 psi. This procedure ensures complete heat penetration and the results are far superior...
$299.00 |
| More info... |
|
|
|
