 |
Volvo S60R Front Mount Intercooler System
Volvo S60R 2004-2008
Designed and engineered specifically for the Volvo S60R, the Bell Intercoolers front mount intercooler system offers unsurpassed performance and craftsmanship. The same race winning combination found in our custom intercoolers, now available in a bolt-on system. Engineered to improve the power and efficiency of the S60R forced induction system, the Bell Intercoolers system uses a large Bar and Plate type core properly sized to safely deliver reduced intake temperatures and...
$1,390.00 |
| More info... |
|
|
 |
 |
VOLVO S40 T5 Front Mount Intercooler System
Volvo S40 T5 / T5 AWD 2004 - 2009
Designed and engineered specifically for the Volvo S40 T5, the Bell Intercoolers front mount intercooler system offers unsurpassed performance and craftsmanship. The same race winning combination found in our custom intercoolers, now available in a bolt-on system. Engineered to improve the power and efficiency of the S40 T5 forced induction system, the Bell Intercoolers system uses a larger Bar and Plate type core properly sized to safely deliver reduced intake...
$825.00 |
| More info... |
|
|
|
 |
Kontrol Pro Damper System
Kontrol Pro Damper System
Ksport Kontrol Pro Fully Adjustable Coilover Kits provide the ultimate in suspension technology for your street or track car. 36 levels of damping adjustment allow you to fine tune the ride to your handling and comfort needs. The damping adjusts compression and rebound simultaneously for ease of adjustment. Pillow ball top mounts in the front and rear on some applications allow you to maintain vehicle manufacturer suspension geometry design. The pillow ball top mounts...
$1,495.00 |
| More info... |
|
|
|
 |
3in. C30 Downpipe
New From VMS
We at VMS have developed a new stainless steel down pipe for the C30 Volvo's Comes complete with all gaskets and hardware for easy installation.
$649.00 $329.00 |
| More info... |
|
|
|
 |
Top pipe w/bov
This is the top replacement pipe for 1993-1997 Volvo 850 Turbos and all 70 series from 1998-2003
$299.00 |
| More info... |
|
|
|
 |
VMS RIP W/HKS BOV
VMS R.I.P Kit W HKS/BOV
VMS Has developed a new reverse intercooler kit that comes with a HKS style blow off valve installed. We at VMS believe that this is the way to go for ultimate performance.
$569.00 |
| More info... |
|
|
|
 |
2004 newer connecting rods
Volvo 2004 and newer
All aluminum Block engines from 2004 to 2008 models
VMS Hi Performance custom connecting rods are made from Certified SAE 4340 steel, vacuum to remove impurities. All surfaces are 100% machined. Shot peened to stress relieve the metal.Multi Stage Heat Treated.Packaged in weight matched sets end to end +/- 1 gram. They come with ARP Bolts. When ordering keep in mind that the price per unit so when ordering for a 4 cylinder you would need to make a purchace of...
$130.00 |
| More info... |
|
|
|
 |
New R.I.P. Kit W/BOV
VMS R.I.P Kit W/BOV
VMS Has developed a new reverse intercooler kit that comes with a greddy style blow off valve installed. We at VMS believe that this is the way to go for ultimate performance. Made from .065 wall aluminum it will maintain a much lower air charge temperture that will increase horse power output.
$529.00 |
| More info... |
|
|
|
|
Volvo Replacement H-Beam Connecting rods
VMS Hi-Performance H-Beam Connecting rods (NOW IN STOCK)
These Connecting rods are a direct replacement for all 850's S/V 40's
960's C/S/V/ 70 series.
All aluminum Block engines from 1993 to 2003 models
VMS Hi Performance custom connecting rods are made from Certified SAE 4340 steel, vacuum to remove impurities. All surfaces are 100% machined. Shot peened to stress relieve the metal.Multi Stage Heat Treated.Packaged in weight matched sets end to end +/- 1 gram. They come with...
$130.00 |
| More info... |
|
|
|
 |
VMS Fuel pressure regulator
HIGH QUALITY CNC MACHNINED 6061 T-6 BILLET ALUMINUM
FULLY ADJUSTABLE UP TO 85 PSI
NECESSARY HARDWARE(FUEL LINE, VAC. HOSE, MOUNTING BRACKET, CLAMPS ETC.) INCLUDED
FUEL PRESSURE GAUGE INCLUDED
$119.00 |
| More info... |
|
|
|
|
|
|
 |
HKS Type BOV
Universal billet aluminum blow-off valve made by VMS. The BOV utilizes a dual valve system to ensure quick response and complete closure during idle. *Aluminum and steel flanges sold separately.
$179.00 |
| More info... |
|
|
|
 |
GT3076R/WG
GT3076R-WG-TURBO
Price:$1,250.00
The "GT3076R-WG" packs the 500HP capable, quick spooling 52 trim 76mm compressor found in the popular GT3037 with the high flowing 90 trim turbine wheel found in the bigger GT3071R-WG, making it the highest flowing turbo available in the internal wastegated configuration. Ideal higher power upgrade for GT28RS/GT2871R/GT3071R-WG setups looking for a lot more power. Comes with T25 style inlet flange.
Turbine
-Wheel: 56.5mm w/ 90 trim
-Housing: .64 or...
$1,250.00 |
| More info... |
|
|
|
 |
Factory Replacement Engines
3 Year unlimited mileage warrenty
Volvo Engines By VMS Are you looking for a low cost rebuilt Volvo engine with maximum performance, with maximum power, with shipping to your door and with minimum problems? If these are your requirements, look no further than VMS! The professionals at VMS know Volvo motors! They are the recognized experts in the industry when it comes to all Volvo product engines - from the economical 240 4-cylinder to the powerful S Series sedans, the family...
$3,995.00 |
| More info... |
|
|
|
 |
VMS/RIP 1002
New RIP From VMS Our new R.I.P. Kit is made from .065 aluminum and is very easy to install and should give some amazing gains in horse power.
When we tested them at 95 degress it dropped the air itake temperture 25 degrees.
$399.00 |
| More info... |
|
|
|
 |
New VMS Drop Links for S/V 40 Series
New from VMS
Hi-Performance adjustable drop links.
These drop links are made form aircraft high quality chomoly steel. The rod ends have a self lubricating polimer insert that will give you very smoothe operation under any condition and will allow you to add preload to either wheel for track tuning conditions And come with a limited lifetime warranty.
If you ever wear them out VMS will replace the rod ends for the life of your car
$199.00 |
| More info... |
|
|
|
 |
New VMS Drop links for you 850/70 series Volvo
New from VMS
Hi-Performance adjustable drop links.
These drop links are made form aircraft high quality chomoly steel. The rod ends have a self lubricating polimer insert that will give you very smoothe operation under any condition and will allow you to add preload to either wheel for track tuning conditions And come with a limited lifetime warranty.
If you ever wear them out VMS will replace the rod ends for the life of your car
$199.00 |
| More info... |
|
|
|
 |
VMS High Performance Motors
Free Shipping Within the Contenital U.S.
This is what is include in one of our VMS Performance Engines
Our performance engines also will increase the H.P. output by at least 20% and increase your fuel effiency by at least 22%.
Due to our internal balancing you can expect a much smoother running engine through out the full power band.
1 set of VMS H-Beam connecting rods 145mm long and a reduction of more than 95 Grams lighter than the factory connecting rods...
$8,499.00 |
| More info... |
|
|
|
|
|
|
 |
New VMS Engine Stabilizer Mount
Engine Stabilizer Mount The original rubber engine stabilizer mount has proven to be a weak link that that can fail prematurely and allow the engine to rock and move during acceleration and braking, significantly affecting the handling and performance of the car. This mount is located near the top of the engine on the back side just to the right of center, connecting the engine to the firewall. The original mount requires a special Volvo press tool for removal and installation. Our improved polyurethane...
$34.95 |
| More info... |
|
|
|
 |
Remanufactured Cylinder Heads
These are VMS Cylinder heads that are Remanufactured in the same way as the cylinder heads that go on all of our race motors. They are full presure tested resurefaced,Full port and polish. They all come with cryo treated valve springs and a five angle valve job. There is a $700.00 core charge that you will get back as soon as we recieve your cylinder head back.
$1,395.00 |
| More info... |
|
|
|
 |
ARP Head Stud Kits
It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition powerplants. Simply stated, there's not a better stud setup on the market today.For openers, ARP uses a premium grade 8740 alloy that is rated far superior to aircraft quality. Then, each stud is placed vertically in special racks and precisely heat-treated to 190,000 psi. This procedure ensures complete heat penetration and the results are far superior...
$299.00 |
| More info... |
|
|
|
 |
VMS Custom Connecting rods and pistons
VMS connecting rod and piston set have been custom designed for optimal performance with the rods being .100 longer than stock and 105 grams lighter than the factory rods we believe that this set will handle up to 550hp with the proper tune up. We have worked real hard to develop a custom setup that can be affordable as well as reliable by using an H beam 4340 chrome moly connecting rods and Ross piston we believe that when you purchase our piston and rod set or a complete rotating assembly that...
$1,995.00 |
| More info... |
|
|
|
 |
H&R Sport Spring Set for your Volvo
H&R Sport Springs are designed and engineered for each particular application and are the correct spring rate for low aggressive looks, high performance handling and no ride harshness! The average drop is 1.25 in.
$269.00 |
| More info... |
|
|
|
